Hardwood
Engineered hardwood
Luxury vinyl plank
Laminate
Porcelain tile
Carpet
Shaw
Mohawk
COREtec
PergoFree in-home measure and written estimate: Shaw, Mohawk, COREtec and Pergo lines compared on your own rooms, with carpet, tile, vinyl plank, laminate and hardwood laid out side by side
Get your free estimateStyles & brands we work with
- Hardwood
- Engineered hardwood
- Luxury vinyl plank
- Laminate
- Porcelain tile
- Carpet
- Shaw
- Mohawk
- COREtec
- Pergo
See the difference
Before
After
Before
After
Before
AfterHow Much Does Hardwood Floor Installation Cost in Henderson?
Hardwood floor installation in Henderson typically runs $4,185 to $11,160 for a 500 to 800 square foot project, materials and labor included. That’s the installed price for a full room or most of a main level, and solid oak sits at the upper end while engineered planks land toward the middle. The written estimate you get after we look at your subfloor is what sets the final number.
Hardwood is the most expensive floor we install, and for good reason. The material is real wood, the prep work is unforgiving, and a bad install shows up as squeaks, gaps and cupping within a season. In Henderson’s dry desert climate, how the wood is acclimated and how the subfloor is prepped matter more than the brand on the box. We install and refinish hardwood, and we also handle flooring installation Henderson across carpet, tile and the rest of our categories. If you want the lay of the land before you commit, our Henderson page covers how we work in this market.
Key Takeaways
- Typical installed cost for hardwood in Henderson: $4,185 – $11,160 for 500 to 800 square feet.
- Hardwood starts around $8 per square foot, before you factor in prep, stairs or transitions.
- Refinishing an existing hardwood floor starts around $3 per square foot and often costs far less than tearing out and replacing.
- Subfloor condition and moisture are the two biggest swing factors in a Henderson home.
- Estimates are free, and our technicians have up to 9 years of experience with hardwood.
Hardwood Floor Installation Cost Breakdown (2026)
Here’s how the money breaks down for a typical hardwood job. These are estimated ranges for the Henderson market, and they cover a project in the 500 to 800 square foot range unless noted. Your written estimate is the final word, because no two rooms and no two subfloors are identical.
| Line item | Typical estimated cost |
|---|---|
| Hardwood floor installation (full project, 500 – 800 sq ft) | $4,185 – $11,160 |
| Hardwood starting price per square foot | From about $8/sq ft |
| Hardwood floor refinishing (existing floor) | $1,675 – $4,650 |
| Refinishing starting price per square foot | From about $3/sq ft |
| Floor repair (per job) | $230 – $1,395 |
| Tile flooring installation (for comparison) | $2,790 – $8,370 |
| Vinyl plank flooring installation (for comparison) | $2,230 – $6,045 |
| Laminate flooring installation (for comparison) | $1,675 – $5,115 |
| Carpet installation (for comparison) | $1,395 – $4,650 |
Those comparison lines matter because a lot of Henderson homeowners are deciding between hardwood and something else for the same room. Hardwood costs the most up front, but it’s the one floor you can sand back and refinish instead of ripping out. That’s the tradeoff: you pay more now for a floor you can restore later. The price per square foot depends on the product, the room and the subfloor, and the written estimate sets it.
What pushes a hardwood job toward the top of that range? Wider planks and premium species cost more than standard oak. Stairs, landings and lots of doorways add labor. A subfloor that needs leveling, patching or a moisture barrier adds prep. And if the old floor has to come out first, that’s removal and disposal on top of the install. A simple, square room over a sound subfloor sits near the bottom. An older home with a wavy floor and a tight hallway sits near the top.
What Affects Hardwood Floor Installation Pricing in Henderson
Pricing in Henderson isn’t just about square footage. These are the factors that move the number, and they’re the ones we look at during the estimate.
- Subfloor condition. Henderson homes sit on slab or over a wood subfloor, and each needs different prep. A slab that’s out of level or has a high moisture reading needs attention before a single plank goes down. Flat, dry and sound keeps you near the low end.
- Desert climate and acclimation. This is dry country, and wood moves with humidity. Planks that aren’t acclimated to the home before installation can gap or cup once the seasons turn. We plan for that in the schedule, and the product instructions set the specifics.
- Wood species and plank width. Oak, maple and hickory behave differently and cost differently. Wider and longer planks carry a higher material price than narrow strip flooring. Engineered and solid hardwood also price apart from each other.
- Room layout and complexity. A clean rectangle installs fast. A room with a curved wall, lots of closets, three doorways and a transition to tile takes more cuts and more time.
- Stairs and transitions. Stair treads, nosing and thresholds are fussy work. They’re often priced per step or per transition rather than by the square foot.
- Removal of the old floor. Carpet comes up fast. Glued-down tile or old hardwood takes more labor to remove and haul away, and that shows up in the estimate.
- Whether you refinish instead. If the existing hardwood is thick enough and in decent shape, refinishing often costs a fraction of new installation. We check the wood’s thickness and condition at the estimate visit; not every floor can be refinished, and a stain won’t always match a sample exactly.
One thing that doesn’t change the price: we’re a floors-only specialist, which means every person on the job works on flooring and nothing else. You deal with one point of contact from product selection through install, with no handoff to a subcontracted crew. Nine trusted brands, one installation team. We match the product to the room, not the other way around.
How to Save on Hardwood Floor Installation
There’s no way around it: hardwood is a premium floor. But there are real ways to keep the Henderson number down without cutting corners on the parts that matter.
- Refinish before you replace. If your existing hardwood has enough thickness left, sanding and refinishing starts around $3 per square foot versus $8 and up for new wood. It’s the smart move when the boards are sound and you just want a fresh surface and updated color.
- Choose engineered where it makes sense. Engineered hardwood can cost less than solid and handles the desert’s humidity swings well. Ask us where it performs better and where solid is worth the extra.
- Keep the layout simple. Fewer transitions and fewer awkward cuts lower labor. If you can keep the hardwood to the main living areas and put carpet or tile in the bedrooms and baths, you trim the square footage that carries the highest price.
- Handle minor prep honestly. A small patch or leveling job now prevents a callback later. We’d rather tell you what the subfloor needs than have you pay twice.
- Get the estimate in writing before you commit. Free estimates mean you can compare a real number against a guess. Call (888) 721-9818 to set one up.
We carry both budget-friendly and premium tiers within trusted manufacturer lines, so we can give you an honest fit-to-budget recommendation instead of pushing the most expensive plank on the wall. That’s the value of a specialist who isn’t tied to a single brand.
Can You Refinish Instead of Replacing Hardwood in Henderson?
Often yes, and it’s worth asking before you budget for a full replacement. Refinishing starts around $3 per square foot and typically runs $1,675 to $4,650 for a project, versus $4,185 and up for new installation. Whether your floor qualifies depends on the thickness of the wood and its condition, which we check at the estimate visit. Refinishing takes real craft: abrasive knowledge, stain matching and finish chemistry. It’s a service a lot of general contractors skip, and it’s one we do. If the boards are too thin or too damaged, we’ll tell you straight and walk you through replacement. Call (888) 721-9818 for a free estimate and a straight answer.
FAQs – Hardwood Floor Installation Cost
How much does hardwood floor installation cost in Henderson?
Hardwood floor installation in Henderson typically costs $4,185 to $11,160 for 500 to 800 square feet, materials and labor included, with hardwood starting around $8 per square foot. The final price depends on the wood you choose, your subfloor and the room layout. Call (888) 721-9818 for an exact quote. Estimates are free.
Is it cheaper to refinish or replace hardwood floors?
Refinishing is usually cheaper, starting around $3 per square foot versus $8 and up for new hardwood, and a typical refinishing project runs $1,675 to $4,650. It only works if the wood is thick enough and in decent shape, which we check at the estimate. Call (888) 721-9818 to find out which makes sense for your floor.
How much does hardwood floor repair cost in Henderson?
Hardwood floor repair typically runs $230 to $1,395 per job, depending on what’s wrong and how many boards are involved. A few squeaky or damaged planks cost far less than a larger section. Call (888) 721-9818 and we’ll quote the repair before any work starts. Estimates are free.
Can you install hardwood over a concrete slab in Henderson?
Yes, in many cases, but the slab has to be dry, clean and flat enough for the product you choose. Engineered hardwood is often the better fit over slab, while solid wood usually needs a wood subfloor. We check moisture and flatness at the estimate, and the product instructions and the written estimate set the requirements.
Does the desert climate affect hardwood installation in Henderson?
It does. Henderson’s dry air means wood needs to be acclimated to the home before installation, or it can gap and cup as the seasons change. We plan for acclimation in the schedule, and the product instructions set the specifics for your wood. Call (888) 721-9818 to talk through your project.
Do you install the brands I see at big-box stores?
We install nine recognized brands, including Shaw, Mohawk, COREtec, Pergo, LifeProof, Mannington, Armstrong, Daltile and Karndean, so you’re not locked into one line. For hardwood specifically, we walk you through solid versus engineered and the species that suit your rooms. Call (888) 721-9818 to talk product before you buy.
How long does a hardwood installation take?
The schedule is set at the estimate. Square footage, subfloor prep, acclimation and the product you choose all affect the timeline, so we give you a real window in writing rather than a guess. Call (888) 721-9818 to book your free estimate.
What’s the difference between solid and engineered hardwood?
Solid hardwood is a single piece of wood and can usually be refinished more times; engineered hardwood is layered and handles humidity swings well, which suits Henderson’s dry climate. Each prices differently and each has rooms where it performs better. We match the product to the room, and the estimate visit settles which one fits yours.
Can you come out today to give me an estimate?
We can often schedule a free estimate quickly. Call (888) 721-9818. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Get a Free Hardwood Floor Installation Estimate in Henderson
If you’re weighing hardwood against tile, vinyl plank or carpet, or you want to know whether your existing floor can be refinished, the fastest way to a real number is a free estimate. We’ll look at your subfloor, talk through the wood that fits your rooms and your budget, and put the price in writing. Licensed and insured, upfront pricing, and a satisfaction guarantee on the work. Call (888) 721-9818. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Our technicians have up to 9 years of experience with hardwood, and we do floors only.
Pricing reflects the Henderson market as of 2026. Flooring Installation Henderson offers free estimates – call (888) 721-9818.
Written by the team at Flooring Installation Henderson.
What Our Customers Say
"Vinyl plank across the whole downstairs, around the stair landing and under the door casings. The cuts at the doorways are tidy and nothing looks like it was forced."
- Ruben Castillo"No issues with the actual work. I did have to call twice to get the invoice emailed to me, which was mildly annoying. The repair itself has been fine."
- Renee Rhodes"Our old carpet had rippled in the living room. They stretched it back flat instead of selling me new carpet, and it has stayed tight."
- Angela Wong